国产一区二区三区av在线无码观看_国产成人精品一区二区三区免费_国产未成女一区二区_色噜噜狠狠色综合成人网_亚洲av永久无码精品放毛片

How to choose the bearing
7/10/2017 4:15:15 PM
How to choose the bearing
The selection of bearings can be started from the following aspects:
First, the load direction, size and nature
All radial bearings can withstand radial loads. All thrust bearings can withstand axial loads, while angular and radial roller bearings can be used for radial and axial loads (combined loads).
The size of the load is usually determined by the size of the bearing. Bearings with larger dimensions can withstand relatively large loads. Generally, the bearing capacity of a roller bearing is larger than that of a ball bearing of the same size. Full-roller bearings can withstand heavier loads than the corresponding bearings with cages. Therefore, ball bearings are mostly used for medium or small loads. In the case of heavy loads and large shaft diameters, roller bearings are generally more suitable.
Angular contact ball bearings and tapered roller bearings need to be installed in pairs.
When the load is not acting on the center of the bearing, an overturning moment is generated. In this case, it is best to use double row bearings (such as double row deep groove ball bearings or double row angular contact ball bearings, etc.), or use face-to-face or back-to-back paired single row angular contact ball bearings or tapered roller bearings. Back-to-back bearings are more tolerant.
Second, the speed
Generally, the working speed of the bearing should be lower than the limit speed listed in the bearing model table. Deep groove ball bearings, angular contact ball bearings and cylindrical roller bearings have high limit speeds and are suitable for high speed operation. The thrust bearing has a lower limit speed.
Third, the support limit requirements
A shaft or other component of a rotating machine, usually supported by a fixed end bearing and a floating end bearing. A bearing that can withstand two-way axial loads can be used as an axial displacement in both directions of a fixed bearing limit. Bearings that can only withstand axial loads in one direction can be supported as one-way stops. The swimming support is not limited. It is optional to use the inner and outer ring inseparable radial bearings to swim in the bearing housing hole. It is also possible to use cylindrical roller bearings with inner and outer rings separable. The inner and outer rings can swim relative to each other. .
Fourth, the alignment performance
If the coaxiality of the two bearing housing holes or the deflection of the shaft is not guaranteed due to various possible reasons, the self-aligning ball bearing, spherical roller bearing and thrust spherical roller bearing with good self-aligning performance should be selected. It can withstand the angular error generated under load and compensate for the initial error caused by machining or installation errors. Deep groove ball bearings and cylindrical roller bearings cannot withstand any angular error.
Fifth, the stiffness requirements
The stiffness of a rolling bearing is the degree to which the bearing is elastically deformed under load. This deformation is generally small and can be ignored. However, in some applications, such as bearings for machine tool spindles or pinion bearings, stiffness is very important.
Generally, the rigidity of the roller bearing is large, and the rigidity of the ball bearing is small. Angular contact ball bearings and tapered roller bearings use a pre-tightening method to increase the rigidity of the support.
Sixth, other
Needle roller bearings or needle roller and cage assemblies are available where radial space is limited; low noise deep groove ball bearings are available for bearing vibration and noise requirements; bearings requiring high rotational accuracy (eg machine tools) For spindles and for applications with high speeds, bearings with higher accuracy than normal grades should be used.
Finally, it is also important to emphasize the economics and market availability when selecting the type of bearing.

主站蜘蛛池模板: 亚洲精品乱码久久久久久自慰| 国产福利无码一区在线| 熟妇人妻无乱码中文字幕| 韩日美无码精品无码| 成人做爰视频www| 国产午夜成人无码免费看| 久久人人爽人人爽人人片av不| 人人入人人爱| 久久久日韩精品一区二区三区 | 亚洲日本va中文字幕| а√天堂8资源中文在线| 久久777国产线看观看精品| 无码少妇一区二区浪潮av | 99久久夜色精品国产网站| 一本色道久久hezyo无码| 男人的天堂在线视频| 国产欧美在线观看不卡| 夜夜影院未满十八勿进| 国产精品乱码久久久久久软件| 伊人情人色综合网站| 精品久久久久久亚洲综合网| 亚洲娇小与黑人巨大交| 亚洲综合另类小说色区| 欧美日韩精品久久久免费观看 | 国产三级精品三级男人的天堂| 亚洲av永久无码天堂网毛片| 国产精品成熟老妇女| 男女做爰真人视频直播| 樱花草在线播放免费中文| 免费a级毛片无码无遮挡| 最新亚洲人成无码网站| 一本大道久久久久精品嫩草| 亚洲日韩小电影在线观看| 国产精品人妻一区免费看8c0m| 人人妻人人添人人爽日韩欧美| 日韩视频 中文字幕 视频一区 | 欧美性大战久久久久久| 久久久久免费精品国产| 波多野42部无码喷潮| 亚洲日本va午夜中文字幕一区| 国产男女做爰高清全过小说|